CCW AWP
CCW AWP is a single component latex-based primer.
CCW AWP is an accessory product to the CCW
MiraDRI 860/861 sheet membrane and is designed to
set the dust on concrete and block surfaces, to promote
adhesion of the CCW waterproofing membrane to the
substrate.
CCW AWP should be spray applied at a coverage
rate of 400 ft² (37.2 m² ) per gallon (3.8 liters). Several
types of sprayers–Airless, Air Assist, Hudson– may be
used. (CCW AWP may also be applied using a roller.
However, caution must be taken not to apply excess
primer which could cause longer drying times.) Normal
drying time will be approximately 30 minutes depending
on job site conditions. Upon curing, CCW AWP will not
transfer when touched. Surfaces exposed for more than
24 hours must be reprimed as they may collect dust
and other contaminants causing adhesion problems.
CCW AWP should be applied at temperatures above
40°F (4.4°C).
DataSheets