Hot Applied Waterproofing
Hot, Fluid-Applied Rubberized Asphalt Waterproofing
CCW 500R
Reinforced Hot Applied Liquid Membrane System
CCW Vapor Lock
Reinforced sheet membrane and hot applied liquid.
Attachment I-B
Attachment I-B – Insulation and Ballast Criteria for CCW-500R and Vapor-Lock™ Systems.
Attachment P-1
Paver Criteria
CAV-GRIP
low-VOC aerosol contact adhesive
CCW 300HV
Water Retention mat for Rooftop Planting Systems
CCW 702
CCW-702 is a quick drying, solvent based, high-tack
adhesive specifically designed to promote maximum
adhesion of CCW Sheet Membrane Waterproofing
products.
CCW 702 LV
CCW-702LV is a quick drying, solvent based, high-tack
adhesive specifically designed to promote maximum
adhesion of CCW self-adhering Membranes
CCW 711-90
90 Mil Thick Sheet Membrane and Flashing
CCW 715
Sheet Membrane Primer - CCW-715 adhesive is designed to allow adhesion of
CCW Sheet Membranes to damp or partially cured
concrete surfaces.
CCW Aerosol Spray Systems
Spray System for CCW primers/adhesives
CCW AWP
CCW AWP is a single component latex-based primer used as an accessory product to the CCW
MiraDRI 860/861 sheet membrane.
CCW Protection Board H
CCW Protection Board-H is a heavy duty asphalt impregnated organic mat with a fi ne mineral applied to the surface to prevent sticking in the roll. CCW Protection Board-H is very tough and provides positive protection to the waterproofing membrane during installation of other work.
CCW Protection Board HS
CCW Protection Board-HS is a heavy duty modifi ed bitumen
protection board consisting of a medium weight fiber glass mat with a high quality SBS (Styrene-Butadiene-Styrene) rubber and asphalt blend. This elastomeric asphaltic blend lends elasticity and flexibility to the sheet. The inorganic fiber glass reinforcing provides high tensile strength, dimensional stability and tear resistance.
CCW Protection Board V
CCW Protection Board-V is the Insulfoam R-Tech Fanfold that is a high-performance, rigid insulation consisting of a superior closed-cell, lightweight and resilient expanded polystyrene (EPS) with advanced polymeric laminated facers designed to provide protection for waterproofing membranes on vertical walls.
CCW Reinforcing Fabric
Spunbonded Polyester Fabric
CCW Uncured Neoprene
Self Curing Neoprene Based Flashing Membrane
EJ-500
EPDM Expansion Joint Waterproofing Material
PROTECTION CAP 250
Cap Termination Sheet