Self-Adhering Sheet Waterproofing
60 mil membrane consisting of rubberized asphalt adhesive completely coating a cross-laminated HDPE film. Factory-controlled composition with simple peel & stick application. For use in below-grade walls & foundations, decks and balconies, beneath shower pans, beneath thick set mortar, beneath kitchens, beneath toilet facilities, beneath mechanical rooms and in split slab constructions
CCW MiraDRI 860/861
CCW MiraDRI 860/861 are self-adhering sheet membranes consisting of 56 mils (1.4 mm) of rubberized asphalt laminated to 4 mils (0.1 mm) of polyethylene to form a minimum 60 mil (1.5 mm) membrane.
CCW 703
LIQUISEAL® Liquid Applied Waterproofing Membrane
CAV-GRIP
low-VOC aerosol contact adhesive
CCW 200V/300HV PROTECTION FABRIC
Protection Fabric for CCW Waterproofing Membranes
CCW 201
Multi Component, Non Sag Polyurethane Sealant
CCW 702
CCW-702 is a quick drying, solvent based, high-tack
adhesive specifically designed to promote maximum
adhesion of CCW Sheet Membrane Waterproofing
products.
CCW 702 LV
CCW-702LV is a quick drying, solvent based, high-tack
adhesive specifically designed to promote maximum
adhesion of CCW self-adhering Membranes
CCW 702 WB
CCW-702 WB is a quick drying, water-based, high-tack adhesive specifically designed to promote maximum adhesion of CCW Sheet Membrane Waterproofing products
CCW 715
Sheet Membrane Primer - CCW-715 adhesive is designed to allow adhesion of
CCW Sheet Membranes to damp or partially cured
concrete surfaces.
CCW Aerosol Spray Systems
Spray System for CCW primers/adhesives
CCW AWP
CCW AWP is a single component latex-based primer used as an accessory product to the CCW
MiraDRI 860/861 sheet membrane.
CCW Protection Board H
CCW Protection Board-H is a heavy duty asphalt impregnated organic mat with a fi ne mineral applied to the surface to prevent sticking in the roll. CCW Protection Board-H is very tough and provides positive protection to the waterproofing membrane during installation of other work.
CCW Protection Board HS
CCW Protection Board-HS is a heavy duty modifi ed bitumen
protection board consisting of a medium weight fiber glass mat with a high quality SBS (Styrene-Butadiene-Styrene) rubber and asphalt blend. This elastomeric asphaltic blend lends elasticity and flexibility to the sheet. The inorganic fiber glass reinforcing provides high tensile strength, dimensional stability and tear resistance.
CCW Protection Board V
CCW Protection Board-V is the Insulfoam R-Tech Fanfold that is a high-performance, rigid insulation consisting of a superior closed-cell, lightweight and resilient expanded polystyrene (EPS) with advanced polymeric laminated facers designed to provide protection for waterproofing membranes on vertical walls.
Liqui-deck
Substrate preparation compound for CCW MiraDRI 860/861
Sure Seal Termination Bar
An extruded aluminum bar designed for securing and sealing flashing terminations.