Bentonite Clay Waterproofing
Needle-punched geotextile fabric containing 1 lb. of sodium bentonite clay per SQ FT. Product is cut to length from roll and mechanically-attached or loose- laid. Ideal for waterproofing below grade structural slabs, lagging walls, concrete caissons, rehab waterproofing and diverse “zero lot line or “blind side” waterproofing applications
CCW MiraCLAY
Bentonite Waterproofing
CCW MiraCLAY EF
Bentonite Clay Waterproofing Membrane
CCW MiraCLAY® GM
Bentonite Waterproofing with a Geomembrane Liner
CAV-GRIP
low-VOC aerosol contact adhesive
CCW 702
CCW-702 is a quick drying, solvent based, high-tack
adhesive specifically designed to promote maximum
adhesion of CCW Sheet Membrane Waterproofing
products.
CCW 702 LV
CCW-702LV is a quick drying, solvent based, high-tack
adhesive specifically designed to promote maximum
adhesion of CCW self-adhering Membranes
CCW 702 WB
CCW-702 WB is a quick drying, water-based, high-tack adhesive specifically designed to promote maximum adhesion of CCW Sheet Membrane Waterproofing products
CCW 715
Sheet Membrane Primer - CCW-715 adhesive is designed to allow adhesion of
CCW Sheet Membranes to damp or partially cured
concrete surfaces.
CCW Aerosol Spray Systems
Spray System for CCW primers/adhesives
CCW AWP
CCW AWP is a single component latex-based primer used as an accessory product to the CCW
MiraDRI 860/861 sheet membrane.
CCW MiraCLAY Granules
Accessory for CCW MiraCLAY Bentonite Waterproofing System
CCW MiraCLAYMastic
Accessory for CCW MiraCLAY Bentonite Waterproofing System
CCW Protection Board H
CCW Protection Board-H is a heavy duty asphalt impregnated organic mat with a fi ne mineral applied to the surface to prevent sticking in the roll. CCW Protection Board-H is very tough and provides positive protection to the waterproofing membrane during installation of other work.
CCW Protection Board HS
CCW Protection Board-HS is a heavy duty modifi ed bitumen
protection board consisting of a medium weight fiber glass mat with a high quality SBS (Styrene-Butadiene-Styrene) rubber and asphalt blend. This elastomeric asphaltic blend lends elasticity and flexibility to the sheet. The inorganic fiber glass reinforcing provides high tensile strength, dimensional stability and tear resistance.
CCW Protection Board V
CCW Protection Board-V is the Insulfoam R-Tech Fanfold that is a high-performance, rigid insulation consisting of a superior closed-cell, lightweight and resilient expanded polystyrene (EPS) with advanced polymeric laminated facers designed to provide protection for waterproofing membranes on vertical walls.